VSC3040 data interconnect vppd-01627 revision 1.0 VSC3040 switch core programming interface outputs [143:0] inputs [143:0] eq eq 11 gbps 144 144 asynchronous crosspoint switch features: applications: benefits: ` 11 gbps 144 144 strictly nonblocking switch matrix with multicast and output striping programming modes ` input signal equalization (ise) with programmable control globally or on a per-channel basis ` adjustable output pre-emphasis eq ` differential current mode logic (cml) data output driver ` protocol-independent switching and data transmission ` 45 mm 45 mm, 1.27 mm pin pitch, 1072-pin bga package ` parallel and serial programming modes for configuration and monitoring ` software control to optimize power dissipation ` 1.584 tbps aggregate bandwidth in a single chip for high-density network switching and video systems ` addresses system-level and board-level signal integrity (si) and intersymbol interface (isi) jitter issues ` eq and drive flexibility for driving boards, backplanes, and circuit traces ` convenient i/o flexibility for interfacing with multiple standards ` can be used with latest storage, ethernet, and networking standards ` layout-friendly package and pinout for easier pcb design ` programming and control convenience ` control and lower overall power when ports are not in use ` high-definition digital broadcast video systems ` multi-service provisioning platforms (mspps) ` mixed tdm/packet switching systems ` high-speed storage, ethernet, and networking equipment ` dwdm switching systems ` high-speed automated test equipment block diagram:
trademarks tm vitesse, asic-friendly, fibretimer, timestream, snoop loop, super fec, focusconnect, meigs-ii, meigs-iie, lansing, campbell-i, barrington, pacemaker, hovcat48, hovcat48e, hovcat192, hovcat192e, micro phy, focus32, focus16, iq2200, nexsas, versacat, gigastream, hawx, sparx, stax, vstax, simpliphy,veriphy, actiphy, xfp pro, sfp pro, smart-link, octalmac, eq technology are trademarks in the uni ted states and/or other jurisdictions of vitesse semiconductor corporation. all other trademarks or registered trademarks mentioned herein are t he property of their respective holders. vitesse semiconductor corporation (?vitesse?) retains the right to make changes to its products or specifications to improve pe rformance, reliability or manufacturability. all information in this document, including descriptions of features, functions, performance, technical spec ifications and availability, is subject to change without notice at any time. while the information furnished herein is held to be accurate and reliable, no re sponsibility will be assumed by vitesse for its use. furthermore, the information contained herein does not convey to the purchaser of microelectronic devices any license under the patent right of any manufacturer. copyright ? 2006 741 calle plano camarillo, ca 93012, usa tel: +1 805.388.3700 fax: +1 805.987.5896 www.vitesse.com sales@vitesse.com VSC3040 VSC3040 line cards fpga/ asic oe backplane application: b a c k p l a n e VSC3040 central switch general description: specifications: 11 gbps 144 144 asynchronous crosspoint switch the VSC3040 device is an asynchronous crosspoint switch designed to carry broadband data streams in a variety of storage, video, and networking equiqment applications. combining the 11 gbps per port bandwidth and 144 144 switch matrix enables a breakthrough 1.5 tbps capacity in a single device. the VSC3040 fully non-blocking switch core is programmed using a multimode port interface that allows random access programming of each i/o port. each VSC3040 data output can be programmed to connect to any of its inputs. the signal path through the device is fully asynchronous, eliminating restrictions on the phase, frequency, or signal pattern of any input. the VSC3040 also integrates the vitesse best-in-class signal integrity and eq technology. a high degree of signal integrity is maintained throughout the device because each high-speed output is a fully differential, switched-current driver with on-die terminations. data inputs are terminated on-die, using 100 resistors between true and complement inputs with a common connection to an internal bias source, which facilitates ac-coupling to the switch inputs. core programming for the VSC3040 device can be sequential on a port-by-port basis, or multiple program assignments can be queued and issued simultaneously. the entire device can be initialized for straight-through, multicast, or other configurations. unused channels can be powered down to allow efficient use of the switch-in applications that require only a subset of the available i/o channels. power-down is enabled in the software by programming individual unused outputs with a power-down code. ` 11 gbps nrz per-channel data rate ` 2.5 v power supply (2.5 v or 3.3 v program port power supply) ` 2.5 v or 3.3 v cmos ttl-compatible i/o ` differential cml i/o with integrated termination impedance
|
